Ski Equipment Servicing
Not only do we sell some of the best names in winter sports equipment, we also offer full servicing on-site for ski and snowboard equipment. Our workshop boasts a state-of-the-art Wintersteiger SNB80– perfect for pre and fine grinding, tuning, cold waxing, de-burring, polishing and side edge grinding.
Ski Servicing Pricelist
Hot Wax - Hand Iron
Skis and Boards
From £20.00
Basic Ski Service
Belt sand the base, bevel the base edges to an angle of 1°, sharpen side edge to 89°, stone grind the base to give a wax absorbing structure, de-burr the whole steel edge, de-tune tup and tail, hot wax and polish - £40.00
Full Ski Service
Belt sand the base, bevel the base edges to an angle of 1°, sharpen side edge to 89°, clean out and then fill all the scratches/gouges on the polyethylene base, remove any excess filling material, stone grind the base to give a wax absorbing structure, de-burr the whole steel edge, de-tune tip and tail, hot wax and polish. - £60.00
Basic Board Service
Belt sand the base, bevel the base edges to an angle of 1°, sharpen side edge to 89°, stone grind the base to give a wax absorbing structure, de-burr the whole steel edge, de-tune tup and tail, hot wax and polish - (Without bindings £45.00) (With bindings £55.00)
Full Board Service
Belt sand the base, bevel the base edges to an angle of 1°, sharpen side edge to 89°, clean out and then fill all the scratches/gouges on the polyethylene base, remove any excess filling material, stone grind the base to give a wax absorbing structure, de-burr the whole steel edge, de-tune tip and tail, hot wax and polish. - (Without bindings £65.00) (With bindings £75.00)
Mount Binding on skis (slide systems only)
Adjust binding to accommodate customers' ski boot, calculate spring release value and set bindings accordingly - £50.00
Mount Binding on skis APLINE (Flat Top, Drilling required)
Adjust binding to accommodate customers' ski boot, calculate spring release value and set bindings accordingly - £55.00
Transfer Bindings
From 1 pair of skis to another - £60.00
Fit Brass Inserts to Stripped Holes
£10.00 Per Insert
Adjust Bindings
To new boot, calculate release setting and set bindings correctly - re-drill not necessary - £30.00
Re-mount (Flat Top, Drilling required)
Remount and adjust bindings to new boot - £60.00